Matrix Setu ATA211G Spezifikationen PDF herunterladen (Seite 82)

76 Matrix SETU ATA211G System Manual

Configuring Peer-to-Peer Calling

To use Peer-to-Peer calling, do the following:

• enable the SIP trunk.

• set the SIP Trunk Mode to Peer-to-Peer.

• configure the number callers must dial to reach this SIP trunk as its SIP ID.

• set the Incoming Call Routing option on the SIP trunk as Route to FXS.

• configure Outgoing Call Route on the FXS port.

• configure Incoming Call Routing on the Mobile port.

• configure the Peer-to-Peer table.

If you have not configured the Peer-to-Peer table from the SIP Trunks page under Basic Settings, you may do so

now.

1. Log in as Admin.

2. Click the Advanced Settings link on the left pane to expand.

3. Click Peer-to-Peer Numbers. The Peer-to-Peer Table opens.

In the Peer-to-Peer table, each entry is stored against an Index Number from 001 to 500. The first entry at

Index001 is reserved for No Match Found.

4. For each Index number,

• In the Number field, enter the peer-to-peer number string—prefix or entire number—that will be dialed.

The number string must not exceed 24 characters. Default: Blank.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 183 184

Keine Kommentare

Matrix Setu ATA211G Spezifikationen Seite 82