Matrix Setu ATA211G Spezifikationen PDF herunterladen (Seite 101)

96 Matrix SETU ATA211G System Manual

4. Configure the following parameters:

• Syslog: Select the check box to enable. By default, disabled.

When enabled, the system will send the debug messages to the Syslog Server IP address. Debug

report can be viewed on the Syslog Server or any other application which can capture the Syslog

messages/debug sent by the system.

• Syslog Server Address : Port: Enter the IP Address of the Syslog Server. A maximum of 15 digits,

including 0-9 and '.' (dot) are allowed.

Enter the Listening Port of the Syslog Server from 1024-65535: 514. By default the Syslog port is 514.

• Syslog Levels: Select the desired debug level by selecting the check box. The system will send debug

messages only for the level you have selected. By default, all debug levels are selected. Clear the

check box to disable the debug level you do not want.

5. Click the Submit button to save the entries.

To debug the System from User mode,

1. Log in as User.

2. Click the Syslog link, under User Settings on the left pane.

3. To configure Syslog settings, refer the steps 4 and 5 described for the Admin mode.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 183 184

Keine Kommentare

Matrix Setu ATA211G Spezifikationen Seite 101