Matrix Setu ATA211G Spezifikationen PDF herunterladen (Seite 53)

Matrix SETU ATA211G System Manual 47

11. You may configure the Pause Timer if you want to insert a delay before dialing the DTMF digits on the

Mobile port. The Pause Timer is typically used in Multi-Stage Dialing. Valid range: 1 to 9 seconds. Default:

2 seconds.

12. In the Returned Calls to Original Caller (RCOC) option, enable the type of RCOC you want to set for the

Mobile Port.

• On Busy: Enable this type if you want to set RCOC when the call is returned if the called party is found

busy.

• On No Response: Enable this type if you want to set RCOC when the call is returned if the called party

does not answer the call.

• On Speech: Enable this type if you want to set RCOC when the call is returned after speech was

established with the called party.

13. Select Replace ‘+’ from CLI Yes check box if you want to replace ‘+’ from the CLI (during incoming call on

mobile) with some other number string.

When an incoming call is received on the Mobile Port, the received CLI usually has a prefix "+". To replace

this prefix with a number string, enable this check box. Default: Disabled.

To replace the prefix with another number you may configure Number String. You can configure the

number string of maximum 6 digits.

If you want to remove '+', keep the Number String blank.

14. Click Submit to save the configurations.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 183 184

Keine Kommentare

Matrix Setu ATA211G Spezifikationen Seite 53