Matrix Setu ATA211G Spezifikationen PDF herunterladen (Seite 34)

28 Matrix SETU ATA211G System Manual

For example, if the peer-to-peer number to be dialed out is [email protected], enter abc.com as

Destination Address. If the number is 1234@ 192.168.1.197, enter 192.168.1.197 as the

Destination Address. The Destination Address can also be in the form of Address:Port number.

• Click Submit to save entries.

• Close the window.

3. Enter the SIP ID. This is the ID which remote parties will use to call this SIP Trunk. Default: Blank.

The SIP ID may be a number or text consisting of a maximum of 40 characters.

If you have defined the trunk mode as Proxy, enter the SIP ID provided by your ITSP. For example, if SIP

URI provided by the ITSP is [email protected], enter 12345 in this field.

If you have defined the trunk mode as Peer-to-Peer, enter the desired SIP ID.

4. Enter Authentication ID. Default: Blank.

If you have defined the SIP trunk mode as Proxy, enter the Authentication ID (User ID) provided by your

ITSP.

If you have defined the trunk mode as Peer-to-Peer, enter the ID of your preference as Authentication ID.

5. Enter Authentication Password. Default: Blank.

If you have defined the SIP trunk mode as Proxy, enter the Authentication Password provided by your

ITSP.

If you have defined the trunk mode as Peer-to-Peer, enter a password of your preference as Authentication

Password.

6. SIP Registration is applicable for Proxy SIP Trunks only. Default: Disabled.

Select the check box to enable. SETU ATA211G will send the REGISTER message to Registrar proxy or

Outbound proxy as applicable.

7. Select the OG Calls without Registration check box to allow the users to make outgoing calls

irrespective of whether the SIP Trunk has been successfully registered with proxy or not.

By default, the system does not allow outgoing calls to be made if the status of the SIP trunk is 'not

registered'.

8. If you have defined the SIP trunk mode as Proxy, in the Registrar Server Address: Port field, enter the

Registrar Server Address and the Registrar Server’s listening port for SIP messages.

The registrar server address may be an IP address or a domain. Default: Blank.

The valid port range is: 1024-65534. Default: 5060.

9. If your service provider uses an outbound proxy for handling voice calls, enable the Outbound Proxy

check box.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 183 184

Keine Kommentare

Matrix Setu ATA211G Spezifikationen Seite 34