Matrix E7x Spezifikationen PDF herunterladen (Seite 56)

9.11 HANDLEBAR ASSEMBLY REPLACEMENT

1) Remove the two screws holding the plastic handlebar cover in place and remove the cover (Figures A & B).

2) Remove the 4 bolts that hold the handlebar to the console mast being careful to support the handlebar (Figures C and D).

3) Carefully remove the wires from inside the console mast until the connectors on the ends come free and disconnect.

4) To install a new handlebar assembly, connect the new handlebar and carefully push the heart rate wires into the console mast.

5) Attach the new handlebar assembly to the console mast using the 4 screws removed in Step 3.

6) Reattach the cover over the handlebar assembly.

7) Test the Elliptical Trainer for function as outlined in Section 8.21.

FIGURE A FIGURE B

FIGURE C

FIGURE D

CHAPTER 9: PART REPLACEMENT GUIDE

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 89 90

Keine Kommentare

Matrix E7x Spezifikationen Seite 56