Matrix SETU ATA211 SIP-FXS-FXO Bedienungsanleitung PDF herunterladen (Seite 4)

KEY FEATURES

Auto Configuration Peer-to-Peer Calling

Auto PSNT Fall back PIN Authentication

PPPoE

Automatic Number Translation Router

SIP Accounts

Call Progress Tones and Rings

Speech Volume Setting

CLIP Speed Dialing

Dial Number Table

Supplementary Services

Surface Mount Technology (SMT)

Disconnect Signaling

System Log

Fax over IP (FoIP)

FXO

Incoming Call Routing

Jeeves (Web based Programming Tool)

MAC Cloning

Multi Stage Dialing

SETU ATA can be configured automatically from a central location. The SETU ATA can make and receive calls from other VoIP users without any Registrar or

configuration details like Registrar Server Address, Authentication User ID, and Proxy server. Numbers and IP addresses can be assigned to the other VoIP users to

User Password are stored in the central server. When user connects SETU ATA to provide direct access across the network. For Peer-to-Peer calling, SETU ATA provides

the network, it automatically downloads its configuration using TFTP. This plug-n- two options - (i) Peer-to-Peer Number Dialing (ii) IP Address Dialing. Organizations

play feature requires the user to enter only the server address provided by the having multiple locations like branch offices and factories can use this feature to provide

service provider. direct dialing between these end-points.

PSTN can be interfaced to the SETU ATA using FXO Port. This port is used to dial Incoming calls on FXS or FXO ports of the ATA can be restricted to a specific caller.

out numbers to the PSTN Network. When Routing the calls from PSTN number to The caller has to first prove his authentication before calling to ATA. This feature is

SIP trunk, it may happen that the Ethernet Link may go down or the SIP Account used to avoid the possibility of malicious calls and to avoid misuse of its services.

used is not registered. So the call will not be routed through SIP and you will get

error tone. To avoid this you can use this feature Auto PSTN Fall Back through

which the call will be automatically get routed through the alternate FXO Port. Matrix SETU ATA supports PPPoE client and hence can be used with any xDSL modems

SETU ATA supports multiple port types, FXO, FXS and SIP. Whenever a number is Basic routing capabilities are provided so that LAN port packets can be transferred on

dialed from any of these ports, gateway routes the call to the desired destination WAN port. This allows the user to browse the internet and check his emails while making

port as per the routing mechanism defined for that port. In certain cases, the dialed and receiving VoIP calls.

number string is not understood by the network through which the call is to be

routed, so by using Automatic Number Translation the dialed number string is

translated into a number that is understood by the network or ITSP to reach the Multiple SIP accounts can be programmed and each FXS user can be assigned one of the

desired destination port. SIP accounts for outgoing calls. Dynamic allocation of SIP account is also possible using

Dial Plan.

Matrix SETU ATA supports programmable tones and rings to match those of the

country where it is installed. SETU ATA allows user to set transmit and receive gain to improve the quality of speech.

SETU ATA allows users to program the FXS ports for any of the three CLIP Frequently used numbers can be programmed in the internal phone book with 99 entries.

protocols - DTMF, FSK ITU-T V.23 and FSK Bellcore 202A. The user can dial these numbers by using short codes in place of the complete, long

numbers.

Matrix SETU ATA provides a list of programmable numbers or part-numbers with

the preferred SIP account for each entry. When the user dials a number, the SETU SETU ATA supports supplementary service like Call Hold, Call Waiting, Call Toggle, Call

ATA finds the matching number using the “best-fit” logic. It then uses the SIP Transfer, Call Forward, Conference, Caller ID, DND and Making another Call. These are

account given against this matching number to make that call. This ensures lowest the service provider dependant features.

cost for all the outgoing calls.

The Surface Mount Technology is the current semi-conductor packaging technology that

When a call is released from the other side of the internet, the Matrix SETU ATA can offers reduction in real estate resulting in less heat generation and low power

propagate this call release on the FXS in the form of disconnect signal. The device consumption. This is in turn improves reliability.

senses this signal and frees the FXS port.

Syslog is one of the built in protocol used extensively for sending debug messages on IP

network. This client/server protocol uses UDP as transport protocol for debugging

The user can send and receive Fax over SIP account, once a Fax machine is

process. Logging has several benefits which include troubleshooting, security and

connected to SETU ATA. The SETU ATA supports FoIP using T.38 UDPTL and Pass

system administration. Debug messages are sent to remote server on IP network for

Through.

finding and reducing the number of bugs or defects from a system.

SETU ATA FXO port should be connected to the PSTN or PBX so that the user can

make PSTN calls from the FXO port.

Calls arriving from any SIP account can be routed to either one or both FXS ports.

Flexible and user friendly windows based software, Jeeves, helps in programming

the features through web browser. This web based programming feature helps

users to configure the SETU ATA from any part of the world once it is connected

with the IP network.

When replacing the existing hardware with other, you can simplify the installation

process by copying the MAC Address of your existing PC. In such case, you do not

need to delay the SETUp process by informing your service provider of newly

installed equipment.

Multi-Stage dialing is useful for ATAs connected to a SIP Server used for

networking PBX of multiple sites. The user can dial the entire number string, both

the destination number and extension number of the destination PBX together. The

ATA will split the string into two stages, and dial out the destination number first and

on receiving the answering signal it dial extension number. This ensures hassle

free access to PBX extension.

1 2 3 4 5 6 7

Kommentare zu diesen Handbüchern

Keine Kommentare

Matrix SETU ATA211 SIP-FXS-FXO Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller Matrix SETU ATA211 SIP-FXS-FXO