Matrix R7xe Bedienungshandbuch PDF herunterladen (Seite 43)

CARE AND MAINTENANCE

WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?

We use sealed bearings throughout our bikes so lubrication is not needed. The most important maintenance step is to simply

wipe your perspiration off the bike after each use.

HOW DO I CLEAN MY MACHINE?

Clean with soap and water cleaners only. Never use solvents on plastic parts. Cleanliness of your unit and its operating

environment will keep maintenance problems and service calls to a minimum. For this reason, Customer Tech Support

recommends that the following preventive maintenance schedule be followed.

DAILY

• Unplug the unit. Clean entire machine using water and a mild soap or

other Matrix approved solution (cleaning agents should be alcohol and

ammonia free).

• Inspect the power cord. If the power cord is damaged, contact Customer

Tech Support.

• Make sure the power cord is not underneath the unit or in any other area

where it can become pinched or cut during storage or use.

WEEKLY

Clean underneath the bike, following these steps:

• Turn off the bike.

• Move the bike to a remote location.

• Wipe or vacuum any dust particles or other objects that may have

accumulated underneath the bike.

• Return the bike to its previous position.

MONTHLY

• Inspect all assembly bolts and pedals on the machine for proper

tightness.

• Clean any debris off of the seat guide rail.

QUARTERLY

• For 7xe consoles, enter service mode and select ‘test’. Select ‘touch

calibration’ and then select ‘start’. Follow the on-screen prompts and

touch the screen where indicated.

To remove power from the exercise

bike, the power cord must be

disconnected from the wall outlet.

WARNING

CONSOLE RESPONSIVENESS

ISSUES (CONSOLE REBOOT):

FOR 7XE CONSOLES:

Press and HOLD the Channel Up and

Channel Down Button until you hear a Beep.

Your console will reset.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 75 76

Keine Kommentare

Matrix R7xe Bedienungshandbuch Seite 43